Difference between revisions of "CoE 197U S2 AY 2022-2023"

From Microlab Classes
Jump to navigation Jump to search
 
(6 intermediate revisions by the same user not shown)
Line 158: Line 158:
 
* Analyze High-swing current sources
 
* Analyze High-swing current sources
 
|  
 
|  
−
* Slides: Current Sources [[https://drive.google.com/file/d/19jU1NupCk66ta6Q3tJyWFYDUagqaZCQs/view?usp=sharing PDF]] [[https://drive.google.com/file/d/19E_0S_4Vvehnc4opAdgsM2defCHxLAVq/view?usp=sharing with annotations]]
+
* Slides: Current Sources [[https://drive.google.com/file/d/19jU1NupCk66ta6Q3tJyWFYDUagqaZCQs/view?usp=sharing PDF]] [[https://drive.google.com/file/d/1LQBAYGi4V2OVDtcDEwU78ianL_LD4PTk/view?usp=sharing Annotated PDF]]
−
* Slides: High-Swing Current Sources [[https://drive.google.com/file/d/15dsEE2jcVoUNasZmvCOlewN77UxfOieB/view?usp=sharing PDF]]
+
* Slides: High-Swing Current Sources [[https://drive.google.com/file/d/15dsEE2jcVoUNasZmvCOlewN77UxfOieB/view?usp=sharing PDF]] [[https://drive.google.com/file/d/1jtwEvsdZ9uWTYQ969RcQXfwyGtOSCOSL/view?usp=sharing Annotated PDF]]
 +
* Videos: [https://drive.google.com/file/d/1vxGdeB_VRUoyA5G4XotYUWxmBPFhXjyN/view?usp=sharing Part 1] [https://drive.google.com/file/d/11cjEGTWBCXKZ92Op4luxM3MMGThBXPbH/view?usp=sharing Part 2]
 
|
 
|
 
* [https://drive.google.com/file/d/1rsYqGJ-TgIk8yMkPa9z_3Q-l3CnkicFH/view?usp=sharing Lab 07]: Current Sources
 
* [https://drive.google.com/file/d/1rsYqGJ-TgIk8yMkPa9z_3Q-l3CnkicFH/view?usp=sharing Lab 07]: Current Sources
Line 176: Line 177:
 
* Slides: MOS Differential Pairs [[https://drive.google.com/file/d/10p4T9_5qMXiXPeVU0B0yHmzmtTabiQ43/view?usp=sharing PDF]]
 
* Slides: MOS Differential Pairs [[https://drive.google.com/file/d/10p4T9_5qMXiXPeVU0B0yHmzmtTabiQ43/view?usp=sharing PDF]]
 
* Slides: Miller Op-Amp [[https://drive.google.com/file/d/1ARDhJZ5SXZ9aMOgDCBVHqwkQAiG0FLsn/view?usp=sharing PDF]]
 
* Slides: Miller Op-Amp [[https://drive.google.com/file/d/1ARDhJZ5SXZ9aMOgDCBVHqwkQAiG0FLsn/view?usp=sharing PDF]]
 +
* Videos: [https://drive.google.com/file/d/1XRNRW5x2GmhDsvfyZ-iOt5JvisZaJ-bl/view?usp=sharing Part 1] [https://drive.google.com/file/d/1zOlnA7GNCBQdeKf0cumAQtAe31QDAqoE/view?usp=sharing Part 2]
 
|
 
|
 
* [https://drive.google.com/file/d/1s5JjDhKb_ABXVH0q5yfaU6gc7DEHRKwt/view?usp=sharing Lab 08]: Differential Amplifier
 
* [https://drive.google.com/file/d/1s5JjDhKb_ABXVH0q5yfaU6gc7DEHRKwt/view?usp=sharing Lab 08]: Differential Amplifier
Line 190: Line 192:
 
* Slides: Folded Cascode [[https://drive.google.com/file/d/1Tg0ZyYzh-rQPGdOqmonEXNXNYPkhJ-aW/view?usp=sharing PDF]]
 
* Slides: Folded Cascode [[https://drive.google.com/file/d/1Tg0ZyYzh-rQPGdOqmonEXNXNYPkhJ-aW/view?usp=sharing PDF]]
 
|
 
|
−
* Lab 09: Design Problem
+
* [https://drive.google.com/file/d/1p-kByLuiUuwYC7jlVHQ0AdCqLzhQIvzx/view?usp=sharing Lab 09]: Design Problem
 
|-
 
|-
 
|}
 
|}

Latest revision as of 11:02, 16 June 2023

  • Introduction to Analog and Digital Integrated Circuit Design
  • Semester Offered: 2nd semester
  • Course Credit: Lecture: 3 units (2 units lecture, 1 unit lab)

Catalog Description

IC Fabrication. CMOS gates. Logical Effort. Interconnect. Memory Elements. MOS Amplifiers. Current Sources. Differential Amplifiers. Operational Transconductance Amplifiers.

Pre-req: EEE 41 or EEE 131. 5h (2 lec, 3 lab) 3 u.

Syllabus

Module Topics Outcomes Resources Activities
Part I: Digital Integrated Circuits
0

Feb 13-18

  • CoE 197U Orientation
  • Set class expectations, discuss grading system
  • Introduction to CoE 197U
  • Syllabus [PDF]
  • Lab orientation
1

Feb 20-25

  • Identify the key characteristics and non-idealities of a CMOS fabrication process.
  • Analyze how these key characteristics and non-idealities change the characteristics of the devices that will be built on it.
  • CoE197U-A1.1: IC Fabrication and Scaling
  • Lab 01: Introduction to Digital IC Design (MOS Characterization)
2

Mar 6-11

  • Simplify the analysis of a CMOS inverter using switch-level transistor models.
  • Determine key CMOS inverter metrics and understand their significance in the analysis and design process.
  • Slides: MOS [PDF]
  • Slides: CMOS Inverter [PDF]
  • Recording: Module Discussion [Video]
3

Mar 13-18

  • Design CMOS static gates
  • Estimate delays of cascaded logic gates
  • Design multistage networks for optimal speed
  • Slides: CMOS Gates [PDF]
  • Slides: Logical Effort [PDF]
  • Additional Slides: LE Example [PDF]
  • HW Module 3 HW (final extension May 5)
  • Lab 03: Static CMOS Gates
4

Mar 20-25

  • Identify sources of power and energy consumption in digital circuits
  • Evaluate energy efficient techniques for digital logic using defined metrics
  • Model interconnects as parasitic resistances and capacitances and estimate corresponding delay
  • Slides: Power and Energy [PDF]
  • Slides: Interconnects [PDF]
  • Lab 04: Delay Optimization and Considerations in Digital Design
5

Mar 20-25

  • Enumerate and distinguish different memory element classifications
  • Identify timing parameters relevant to memory elements and their effects on sequential circuit timing
  • Design and characterize basic memory elements
  • Slides: Memory [PDF]
  • Slides: Timing [PDF]
  • Slides: Optional materials [PDF]
  • Video: Module discussion [Link]
  • 2019 Exam: [PDF]
Part II: Analog Integrated Circuits
6

Apr 17-22

  • MOS Amplifiers: DC and AC Analysis
  • Determine the DC operating point of MOS amplifiers.
  • Extract the MOS small-signal parameters depending on the DC operating point.
  • Analyze MOS amplifiers in the AC and DC domain.
  • Derive the two-port network representation of MOS amplifiers.
  • Identify the appropriate application of a MOS amplifier topology based on its two-port parameters.
  • Lab 05: Introduction to Analog IC Design (MOS Characterization)
7

Apr 24-29

  • MOS Amplifiers: Frequency Response
  • Analyze MOS amplifiers in the frequency domain.
  • Sketch the Bode plots of the transfer function.
  • Estimate the dominant pole using ZVTCA.
  • Lab 06: Common-Source Amplifier with Resistive Load
8

May 8-13

  • Current Sources
  • High-Swing Current Sources
  • Understand ideal and real sources
  • Analyze MOS simple current mirror
  • Analyze High-swing current sources
9

May 15-20

  • Understand differential circuits
  • Analyze MOS differential pairs
  • Understand operational amplifier operation
  • Analyze Miller Operational Amplifiers
  • Lab 08: Differential Amplifier
10

May 22-27

  • Folded Cascode Operational Transconductance Amplifiers
  • Identify the different stages in a folded cascode OTA.
  • Determine the components and/or parameters that affect the DC operating point of a folded cascode OTA.
  • Explain how to design a folded cascode OTA.
  • Slides: Folded Cascode [PDF]

References

  • Rabaey, Chandrakasan, Nikolic, Digital Integrated Circuits, 2ed., Pearson 2002.
  • Gray, Hurst, Lewis, Meyer, Analysis & Design of Analog Integrated Circuits, Wiley 2001.
  • Johns, Martin, Analog Integrated Circuit Design, Wiley 1997.
  • Design of Analog CMOS Integrated Circuits, Behzad Razavi, McGraw-Hill, 2000.
  • R. Jacob Baker, Circuit Design, Layout,and Simulation, 4ed., IEEE Press 2019.
Retrieved from "https://classes.up-microlab.org/index.php?title=CoE_197U_S2_AY_2022-2023&oldid=4007"