Difference between revisions of "CoE 197U IC Fabrication"

From Microlab Classes
Jump to navigation Jump to search
(Created page with "Welcome to CoE 197U! Since we are offering this class remotely, there will be many changes to our normal course delivery: # There will be no face-to-face lecture classes. All...")
 
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Welcome to CoE 197U!
 
 
Since we are offering this class remotely, there will be many changes to our normal course delivery:
 
# There will be no face-to-face lecture classes. All the material will be made available via this site.
 
# There will be more emphasis on student-centric activities, e.g. analysis, design, and simulations. Thus, you will be mostly "learning by doing". In this context, we will set aside an hour every week for consultations and questions via video-conferencing.
 
# Grades will be based on the submitted deliverables from the activities. Though we will not be very strict regarding the deadlines, it is a good idea to keep up with the class schedule and avoid cramming later in the semester.
 
 
{{Note|Please remember that this semester is very different from those before, and please make sure you inform me if you have any issues or difficulties regarding the class. Also, keep in mind that you will need to pay a bit more attention to your time management as it will play a critical role during the course of the semester.|reminder}}
 
 
Let's get started!
 
 
 
== CMOS Technology Review ==
 
== CMOS Technology Review ==
 
Knowing how integrated devices are fabricated, and how the fabrication process affects the characteristics and performance of these devices, is one of the pillars of good analog and digital circuit design. In this module, we are interested in the relationships between the fabrication process steps and parameters to the device characteristics and performance.  
 
Knowing how integrated devices are fabricated, and how the fabrication process affects the characteristics and performance of these devices, is one of the pillars of good analog and digital circuit design. In this module, we are interested in the relationships between the fabrication process steps and parameters to the device characteristics and performance.  
Line 36: Line 25:
 
|}
 
|}
  
== The Submicron CMOS Transistor ==
+
Proceed to the next module: [[CoE197U_2s2324_Scaling | Scaling]]
{{Note|[[CoE197U-A1.1 | '''Activity A1.1''' IC Frabrication]] -- This activity provides an overview of the CMOS fabrication process, and its future directions.|reminder}}
 
 
 
== Introduction to SPICE Simulation ==
 
Simulation is a key tool in the analysis, design, and verification of analog integrated circuits. In this class, we will use SPICE simulations extensively in our activities and projects. Thus, it is a good idea to go through a short tutorial on '''ngspice''' [[ngspice Tutorial|here]].
 
  
{{Note|[[CoE197U-A1.2 | '''Activity A1.2''' A SPICE Simulation Walkthrough]] -- This activity walks you through a simple SPICE simulation example.|reminder}}
+
Back to Main Page [[CoE 197U S2 AY 2023-2024]]
  
 
== References ==
 
== References ==
 
<references />
 
<references />

Latest revision as of 15:23, 19 February 2024

CMOS Technology Review

Knowing how integrated devices are fabricated, and how the fabrication process affects the characteristics and performance of these devices, is one of the pillars of good analog and digital circuit design. In this module, we are interested in the relationships between the fabrication process steps and parameters to the device characteristics and performance.

However, many advances in CMOS fabrication processes are, most of the time, driven by the performance requirements of digital circuits. As we can see in Figs. 1-3, scaling offers significant improvement in device area, speed, and power consumption.

Figure 1: Area improvement[1].
Figure 2: Delay improvement[1].
Figure 3: Power consumption[1].

In many cases, this reduction in delay, which translates to increased clock frequencies, it not really realized, due to the increased heat dissipation requirements at high clock frequencies, since , where is the activity factor of a digital circuit, is the effective capacitance being driven, is the supply voltage, and is the clock frequency. This is evident in Fig. 4, where even though the transistor count increases due to scaling, the power limits the further increase in clock frequencies. Thus, in order to increase performance, designers use "More than Moore" techniques such as parallelism.

Figure 4: Scaling and processor performance[2].
Figure 5: Supply and threshold voltage scaling[3].

One way to reduce the power consumption of digital circuits is to reduce the supply voltage, as seen in Fig. 5. In many ways, as we will see during the semester, reducing the supply voltage makes analog design harder by (1) reducing the signal-to-noise ratios, and (2) increasing the effect of variability as illustrated in Fig. 6. The task of the digital and analog designer, therefore, is to design circuits that operate reliably in the face of the various constraints imposed by the fabrication process.

Figure 6: Reducing : Analog vs. Digital[4]

Proceed to the next module: Scaling

Back to Main Page CoE 197U S2 AY 2023-2024

References

  1. 1.0 1.1 1.2 Aaron Stillmaker, Bevan Baas, Scaling equations for the accurate prediction of CMOS device performance from 180nm to 7nm, Integration, Volume 58, 2017, Pages 74-81, ISSN 0167-9260, https://doi.org/10.1016/j.vlsi.2017.02.002.
  2. Karl Rupp, 42 Years of Microprocessor Trend Data, https://www.karlrupp.net/2018/02/42-years-of-microprocessor-trend-data/
  3. ITRS, The International Technology Roadmap for Semiconductors (2004 edition), 2004. Technical Report, http://public.itrs.net
  4. Rob A. Rutenbar (CMU)