Nonlinearity

From Microlab Classes
Revision as of 22:27, 19 September 2020 by Louis Alarcon (talk | contribs)
Jump to navigation Jump to search

Most of the time, we want our amplifiers to be linear. However, since the transistors that we use are inherently nonlinear, our circuits are also inherently nonlinear. One way to analyze nonlinear circuits is to use small-signal analysis, where we assume the circuit is linear for very small signals. In this module, we will look at the effects of nonlinearity that are not seen when performing small-signal analysis.

In this module, we will assume that we have memoryless systems, i.e. systems whose output is an instantaneous function of the input. Thus, we neglect the contribution of energy-storage elements like capacitors and inductors.

Harmonic Distortion

Consider a memoryless system with input and output . In general, we can express the output as:

 

 

 

 

(1)

Note that for a linear system, is the gain, and for . Let us consider the case when the input is a sinusoid, . Let us further assume that the higher-order terms ( for ) are negligible. We can then express the output as:

 

 

 

 

(2)

Note that the output contains:

  • A DC term
  • A component with frequency equal to the input frequency, or the fundamental frequency.
  • A component at twice the input frequency, or the second harmonic frequency.
  • A component at thrice the input frequency, or the third harmonic frequency.

Gain Compression

Cross Modulation

Intermodulation

Cascaded Nonlinear Stages

AM/PM Conversion