Series Resonant Circuits
Consider the series resonant RLC circuit shown in Fig. 1. We can calculate the total impedance seen by the source , as:
-
|
|
(1)
|
Combining the imaginary terms of the impedance, we get:
-
|
|
(2)
|
We can see that the imaginary component of the impedance becomes zero at the resonant frequency, , equal to:
-
|
|
(3)
|
Note that the cancellation is narrowband, since perfect cancellation occurs only at a single frequency. Thus, from the point of view of the voltage source , the impedance is purely real. We can then calculate the current, as:
-
|
|
(4)
|
We then use this current to calculate the voltage across the inductor and capacitor:
-
|
|
(5)
|
-
|
|
(6)
|
Where is the series circuit quality factor:
-
|
|
(7)
|
Note that:
- For small values of results in large values of , leading to large voltages across the inductor and capacitor.
- The voltage across the inductor is exactly out of phase with the capacitor voltage, thus cancelling each other out.
Parallel Resonant Circuits
For the parallel resonant RLC circuit in Fig. 2, the total admittance seen by the current source is:
-
|
|
(8)
|
Once again, we get the resonant frequency, .