Series Resonant Circuits
Figure 1: A series RLC circuit.
Consider the series resonant RLC circuit shown in Fig. 1. We can calculate the total impedance seen by the source , as:
-
|
|
(1)
|
Combining the imaginary terms of the impedance, we get:
-
|
|
(2)
|
We can see that the imaginary component of the impedance becomes zero at the resonant frequency, , equal to:
-
|
|
(3)
|
Note that the cancellation is narrowband, since perfect cancellation occurs only at a single frequency. Thus, from the point of view of the voltage source , the impedance is purely real. We can then calculate the current, as:
-
|
|
(4)
|
We then use this current to calculate the voltage across the inductor and capacitor:
-
|
|
(5)
|
-
|
|
(6)
|
Where is the series circuit quality factor:
-
|
|
(7)
|
Note that:
- For small values of results in large values of , leading to large voltages across the inductor and capacitor.
- The voltage across the inductor is exactly out of phase with the capacitor voltage, thus cancelling each other out.
Parallel Resonant Circuits
Figure 2: A parallel RLC circuit.
For the parallel resonant RLC circuit in Fig. 2, the total admittance seen by the current source is:
-
|
|
(8)
|
The admittance becomes purely real at the resonant frequency, . Once again, we can calculate the voltage across as:
-
|
|
(9)
|
Thus, the currents through the inductor and capacitor can be expressed as:
-
|
|
(10)
|
-
|
|
(11)
|
Where the parallel quality factor, is equal to:
-
|
|
(12)
|
Similar to the series resonant circuit, we see that even though the currents through the reactances cancel out, the individual currents could be very large.