Difference between revisions of "Nonlinearity"
Line 6: | Line 6: | ||
Consider a memoryless system with input <math>x\left(t\right)</math> and output <math>y\left(t\right)</math>. In general, we can express the output as: | Consider a memoryless system with input <math>x\left(t\right)</math> and output <math>y\left(t\right)</math>. In general, we can express the output as: | ||
− | {{NumBlk|::|<math>y\left(t\right) \approx | + | {{NumBlk|::|<math>y\left(t\right) \approx \alpha_1 x\left(t\right) + \alpha_2 x^2\left(t\right) + \alpha_3 x^3\left(t\right) + \ldots</math>|{{EquationRef|1}}}} |
− | Note that for a linear system, <math>a_1</math> is the gain, and <math>a_i = 0</math> for <math>i \neq 1</math>. | + | Note that for a linear system, <math>a_1</math> is the gain, and <math>a_i = 0</math> for <math>i \neq 1</math>. Let us consider the case when the input is a sinusoid, <math>x\left(t\right)=A\cos\omega t</math>. We can then express the output as: |
+ | |||
+ | {{NumBlk|::|<math>\begin{align} | ||
+ | y\left(t\right) & = \alpha_1 A\cos\omega t + \alpha_2 A^2\cos^2\omega t + \alpha_3 A^3\cos^3\omega t + \ldots \\ | ||
+ | & = \alpha_1 A\cos\omega t + \frac{\alpha_2 A^2}{2}\left(1 + \cos 2\omega t\right) + \frac{\alpha_3 A^3}{4}\left(3\cos\omega t + \cos 3\omega t\right) \ldots \\ | ||
+ | \end{align}</math>|{{EquationRef|2}}}} | ||
== Gain Compression == | == Gain Compression == |
Revision as of 19:50, 19 September 2020
Most of the time, we want our amplifiers to be linear. However, since the transistors that we use are inherently nonlinear, our circuits are also inherently nonlinear. One way to analyze nonlinear circuits is to use small-signal analysis, where we assume the circuit is linear for very small signals. In this module, we will look at the effects of nonlinearity that are not seen when performing small-signal analysis.
In this module, we will assume that we have memoryless systems, i.e. systems whose output is an instantaneous function of the input. Thus, we neglect the contribution of energy-storage elements like capacitors and inductors.
Contents
Harmonic Distortion
Consider a memoryless system with input and output . In general, we can express the output as:
-
(1)
-
Note that for a linear system, is the gain, and for . Let us consider the case when the input is a sinusoid, . We can then express the output as:
-
(2)
-