MOS Transistors

Analog circuits are generally sensitive to the nuances and details of transistor behavior, requiring precise and/or well-controlled voltages, currents, etc. Digital circuits, on the other hand, can have much larger margins of error due to their inherent noise margins and regenerative properties. Thus, we want to be able to model these nuances and details of transistor behavior in order to predict their effects on our circuits.

Transistor Models

Transistor models enable us to describe and predict the behavior of the circuits we build using these transistors by:

• Providing us with a window into the physical device characteristics (e.g. dimensions, material and device properties, etc.) and processes (e.g. drift/diffusion currents, tunneling, charge transfer, etc.), and
• Allowing us to perform easy to do "experiments" using simulators such as SPICE.

Levels of Abstraction

The complexity of transistor models can range from very simple models, such as modeling the transistor as a simple controlled switch, to very complex models such as BSIM models with hundreds of parameters.

We choose a model based on the questions we want answered. For example:

• For predicting the digital (boolean) functionality of a static CMOS gate, we can simply model the transistor as a controlled switch.
• However, if we want to predict the performance of the CMOS gate, we might need to model the ON current of the transistor as a current source in series with a switch.
• For high-precision analog circuits, we might need a BSIM model to predict the noise performance, settling time, stability, etc.

Note that "questions" that are more complicated require more complex and mathematically intensive models. Thus, it is best to match the model complexity to the problem or question we want answered. Further note that different models can be used to answer different questions at different stages of the design process.

The Square-Law MOSFET Model

Figure 1: The idealized MOSFET used to derive the square-law model.

The widely known square-law MOSFET model is a good model for predicting the behavior of discrete and relatively large-sized transistors. It relates the drain current to the gate-to-source voltage as:

$I_{D,\mathrm {sat} }={\frac {\mu _{n}C_{ox}}{2}}\cdot {\frac {W}{L}}\cdot \left(V_{GS}-V_{th}\right)^{2}$

(1)

However, this is inadequate for modeling short-channel behavior, since it is based on the following assumptions:

• The charge density is determined only by the vertical electric field due to $V_{GS}$.
• Drift velocity is set only by the lateral electric field due to $V_{DS}$.
• The mobility of electrons and holes are constant.
• There are no diffusion currents, and that $I_{D}=0$ when $V_{GS}<V_{th}$.